Speed Bump Heavy Duty Plastic Yellow 8 ft w/Hardware

A speed bump is short and steep, so it slows vehicles to a crawl in parking lots, garages and drive lanes. A speed hump is wider and more gradual, so it slows traffic without as sharp a jolt, which suits longer drives and lighter traffic areas. End caps finish the edges of either one for a clean, tapered look.

Speed bumps come in recycled rubber and heavy duty plastic, from 3 feet up to 8 feet long, with yellow reflective striping or solid yellow color so drivers see them. The rubber bumps will not warp, crack or rot, and the plastic bumps are UV stabilized and chemical resistant. Bundles of 10 and 30 cover a full lot at a lower price per bump.

Cable protectors are low ramps with channels inside that cover hoses and power cords running across a floor, lot or road, so vehicles and people can cross without damaging the lines or tripping. The Elasco Lite Guard, Mighty Guard and Ultra Guard lines run from light duty to heavy duty, with 1 to 7 channels, plus turns, intersections and end caps to build out a run. Drop over styles slip over a cable that is already in place.

Gear for running a lot or garage: parking blocks, speed bumps and cable protectors, wheel chocks, bumper guards, EV parking signs and blocks, pavement stencils and marking tape, curb and sidewalk signs, disposable trash bins and more.

Start with stops and flow: parking blocks at the head of each space, speed bumps where cars need to slow down, and signs for entrances, exits, reserved and accessible spaces. Then add pavement markings, bumper guards on columns and corners, and EV signs and blocks for charging spaces.